Service
We at Staffs Industrial Door Ltd strongly recommend that roller shutter doors are serviced on a regular basis to ensure safe economical operation. The operator should check on a regular basis that the door is working freely and that there is no obvious damage to the door. It is important to repair any damage immediately to ensure that the door is operating as safely as possible at all times. Use of the door when damaged will only cause further problems at a later stage. We would recommend that at least once a year our fully trained Engineers service the doors.
The Service Includes
Check all fixings and tighten where necessary
-
Check spring tension and adjust where necessary
-
Fully inspect all mechanical parts
-
Lubricate parts as necessary
-
Check motor fixings
-
Check gearbox
-
Check limits and adjust if necessary
Contact the Service Department on 01782 566 810 to arrange an appointment.
Maintenance
THE FOLLOWING RECOMMENDATIONS ARE MADE FOR MAINTENANCE AND ESSENTIAL REPAIR WORK SO THAT THE FULL USE OF THE DOOR THROUGHOUT ITS ECONOMICAL WORKING LIFETIME IS OBTAINED.
MAINTENANCE FREQUENCY
TO ENSURE SAFE AND RELIABLE OPERATION, REGULAR INSPECTION AND MAINTENANCE ARE ESSENTIAL.
THE FREQUENCY OF MAINTENANCE DEPENDS ON THE FREQUENCY OF USE.
ALL MAINTENANCE SHOULD BE CARRIED OUT BY FULLY TRAINED AND COMPETENT DOOR INSTALLATION ENGINEERS. IT IS ADVISAVLE TO ENCOURAGE PERSONNEL TO REPORT ANY DAMAGE OR DEFECTS NOTICED DURING DAY TO DAY USAGE.
PROMPT REPAIR ACTIONS WILL AVOID ANY UNNECESSARY OVER STRESSING OF COMPONENTS AND CAN GREATLY PROLONG THE USEFUL LIFE OF THE DOOR.
GUIDELINES FOR MAINTENANCE SCHEDULE:
CYCLES PER DAY SERVICE SCHEDULE
OVER 45 CYCLES PER DAY EVERY 2 MONTHS
UP TO 45 CYCLES PER DAY EVERY 3 MONTHS
UP TO 30 CYCLES PER DAY EVERY 4 MONTHS
UP TO 15 CYCLES PER DAY EVERY 6 MONTHS
|
Please fill in the details below and we will Call you to discuss your requirements
|
|
